LABORATORY MODIFICATIONS REQUESTED BY THE CUSTOMER: BAND EXTENSION, PROGRAMMING, CIRCUIT TWEAKING, ALIGNEMENT

YAESU - FTDX10 - SDR-HYBRID HF/50/70 MHz TRANSCEIVER - 5" TOUCH SCREEN DISPLAY - AUTOMATIC TUNER - 100W

 - CASHBACK PROMO -
YAESU GIVES YOU BACK € 100
IF YOU PURCHASE FROM MAY 10th TO JUNE 30th, 2024 !!

YAESU will send the cash back refund directly to the end user within 8 weeks after receiving the completed application together with a copy of the purchase invoice / sales slip issued by the retailer.
The duration of the offer refers to the date of purchase by the end user of the product.
This offer is valid only for new products with CE mark, purchased in Europe during the validity dates.
For the official regulation of cash back policies, please refer to the official website yaesucashback.co.uk

 

FT DX 10 Features

• 15 separate band pass filters
• Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, COUNTOUR)
• High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2
• Aluminum Heat Sink with 80mm low-noise axial flow cooling fan
• High Speed Automatic Antenna Tuner with a large capacity 100-channel memory
• RF & AF Transmit Monitor
• Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode)
• QMB (Quick Memory Bank)
• Band Stack Function
• Optional speaker – SP-30 designed for the new FTDX10
• Optional roofing filter (300Hz) – XF-130CN available

Hybrid SDR Configuration

Like the FTDX101 series, the new FTDX10 utilizes the Yaesu Hybrid SDR configuration – Narrow Band SDR and Direct Sampling SDR. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope.

Narrow Band SDR

Narrow Band SDR with 3 types of Roofing Filters and Phenomenal Multi-signal receiving Characteristics

Like the FTDX101 series, the Down Conversion type receiver configuration with the first IF at 9MHz has been adopted. It makes it possible to incorporate excellent narrow bandwidth crystal roofing filters that have the desired sharp “cliff edge” shape factor. Thanks to the Narrow Band SDR with the latest circuit configuration including 500Hz, 3kHz and 12kHz roofing filters and low noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141dB or more, and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109dB or more, in the 14MHz band at 2kHz separation.

High Resolution Direct Digital Synthesizer

250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords Quiet and Clear Reception

The local circuit of the new FTDX10 uses 250MHz HRDDS method same as the FTDX101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145dB or less in 14MHz at 2kHz separation.

3-Dimensional Spectrum Stream

3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel Functionality

The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed, and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTDX101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available.

Front Panel

Front Panel Designed for Superior Operating Efficiency

Front Panel Designed for Superior Operating Efficiency MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels.

Remote Operations

Remote Operation with optional LAN unit (SCU-LAN10)

Remote operation of the new FTDX10 is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operation such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network.

FTDX10 HF/50MHz band 100W Transceiver

• Hybrid SDR configuration utilizing a Narrow Bandwidth SDR, and a Direct Sampling SDR
• Narrow Band SDR enables Phenomenal Multi-signal Receiving characteristics (2kHz RMDR 116dB+, 2kHz BDR 141dB+, 2kHz 3rd IMDR 109dB+) – Down conversion, 9MHz IF Roofing Filters produce Excellent Shape Factor
• 250 MHz HRDDS (High Resolution Direct Digital Synthesizer) Ultra Low-Noise Local-Oscillator System
• 15 Separate Powerful Band Pass Filters (BPF)
• Effective QRM Rejection with IF DSP (IF SHIFT/WIDTH, IF NOTCH/DNF,CONTOUR,DNR, APF)
• High-quality and Super-Stable Final Amplifier utilizing the new push-pull MOSFET RD70HUP2
• 5-inch Full Color Touch Panel and 3DSS (3-Dimensional Spectrum Stream) Display
• MPVD (Multi-Purpose VFO Outer Dial) enables Outstanding Operating Performance
• Quick Memory Bank (QMB)
• Supports CW operation with multiple functions such as: CW zero-in, CW Auto zero-in, CW Reverse, CW decode, CW keying Signal form Shaping by FPGA and others
• RTTY (FSK)/ PSK Encode/Decode Function
• Other practical features such as Optional RF Gain Selection by IPO. Automatic Gain Control, Quick Split Function – SD Card Slot
• Remote Operation via Internet with optional LAN-Unit (SCU-LAN10)

FTDX10 Supplied Accessories:

• Microphone SSM-75E
• DC Power Cable w/Fuse
• Operating Manual
• 6.3mm 3-contact Plug

YAESU - FT-450D - COMPACT ALL MODE HF + 50 MHz TRANSCEIVER WITH BUILT-IN AUTOMATIC ANTENNA TUNER

LATEST 2020 SERIAL NUMBERS

The FT-450D is a compact yet superb HF/50MHz radio with state-of-the-art IF DSP technology configured to provide World Class performance in an easy to operate package. New licensees, casual operators, DX chasers, contesters, portable / field enthusiasts, and emergency service providers…This Radio is for YOU !

• Illuminated Key Buttons
• 300Hz / 500Hz / 2.4 kHz CW IF Filter
• Front Feet Stand 
• Classically Designed Main Dial and Knobs
• Dynamic Microphone MH-31A8J Included

YAESU - SCU-28 - 10-PIN MINIDIN CABLE - TO CONNECT SOME YAESU HF RADIOS TO POWER LINEAR AMPLIFIERS AND OTHER USES

LENGHT: m 1.95

SUITABLE FOR USE WITH SEVERAL DIFFERENT YAESU RADIOS, AMONG WHICH ARE:

FTDX-10
FTDX-3000
FTDX-1200
FT-950
FT-450

The user will then have to solder the appropriate connector or connectors on the conductors according to the amplifier used.

LABORATORY MODIFICATIONS REQUESTED BY THE CUSTOMER: BAND EXTENSION, PROGRAMMING, CIRCUIT TWEAKING, ALIGNEMENT

NOTE:

For this device the possible TX expansion (only for permitted uses) is as follows:
1.6-54MHz
68-74.8 MHz (attention: at the moment on this segment the TX power is practically zero)
118-174 MHz
400-470 MHz

LABORATORY MODIFICATIONS REQUESTED BY THE CUSTOMER: BAND EXTENSION, PROGRAMMING, CIRCUIT TWEAKING, ALIGNEMENT

LABORATORY MODIFICATIONS REQUESTED BY THE CUSTOMER: BAND EXTENSION, PROGRAMMING, CIRCUIT TWEAKING, ALIGNEMENT

LABORATORY MODIFICATIONS REQUESTED BY THE CUSTOMER: BAND EXTENSION, PROGRAMMING, CIRCUIT TWEAKING, ALIGNEMENT

LABORATORY MODIFICATIONS REQUESTED BY THE CUSTOMER: BAND EXTENSION, PROGRAMMING, CIRCUIT TWEAKING, ALIGNEMENT

YAESU - FT-710 AESS - FULL SDR HF/50 MHz TRANSCEIVER 100W WITH AUTOMATIC ANTENNA TUNER AND BUILT-IN USB INTERFACE FOR DIGITAL MODES - TOUCHSCREEN 4.3" - BUILT-IN CAT INTERFACE
--->>ALSO WORKS ON 70MHz – 70.5MHz (SELECTING THE UK Amateur BAND BY MENU SETTING)

- COMPLETE BROCHURE AVAILABLE BY CLICKING ON "PRODUCT DATA SHEET" CLOSE TO THE PRICE 

- CASHBACK PROMO -
YAESU GIVES YOU BACK € 100
IF YOU PURCHASE FROM MAY 10th TO JUNE 30th, 2024 !!

YAESU will send the cash back refund directly to the end user within 8 weeks after receiving the completed application together with a copy of the purchase invoice / sales slip issued by the retailer.
The duration of the offer refers to the date of purchase by the end user of the product.
This offer is valid only for new products with CE mark, purchased in Europe during the validity dates.
For the official regulation of cash back policies, please refer to the official website yaesucashback.co.uk

 

PRODUCT DESCRIPTION

The new FT-710 AESS is a compact design yet provides 100W output, utilizing the advanced digital RF technology introduced in the FTDX101 and FTDX10 series.

A few of the remarkable features of the new FT-710 AESS are:

- YAESU Unmatched SDR technology emphasizes the Receiving Performance

- Band Pass Filters dedicated for the amateur bands to eliminate out-of-band unwanted signals

- RF Front-End design with the 250MHz HRDDS (High Resolution Direct Digital Synthesizer) enables Phenomenal Multi-Signal Receiving Characteristics

- QRM rejection by the dual core 32-bit high speed floating decimal point DSP for SHIFT/ WIDTH/ NOTCH/ CONTOUR/APF (Audio Peak Filter)/ DNR (Digital Noise Reduction)/ NB (Noise Blanker) and 3-Stage Parametric Equalizer

- High Resolution 4.3-inch TFT Color Touch Panel Display

- 3DSS (3-Dimensional Spectrum Stream)

- VMI LED (VFO Mode Indicator) placed around the VFO dial shows the current operating mode (VFO-A, VFO-B, Memory Mode and Clarifier/Split Operation)

- “PRESET” Mode Function most suitable for FT8 Operation

- AESS: Acoustic Enhanced Speaker System with SP-40 creates the high-fidelity audio output

- External Display Connection Terminal (DVI-D)

- Built-in High Speed Automatic Antenna Tuner with 100 channel memory

- Support the FC-40 Auto Antenna Tuner

- SD Memory Card can be used to save the communication record, transceiver setting, the memory contents, screen capture images, and to update the firmware

- Two (2) USB Ports (Type-A and Type-B)

- Other essential features such as CW ZIN and SPOT, IPO (Intercept Point Optimization), and Remote Operation with Network Remote Control System to name a few.

FT-710 AESS (Supplied Accessories)

·SSM-75E

Hand microphone

·SP-40

High-Quality

External Speaker

·DC Power Cable

Specifications:

TX Frequency Range: 1.8MHz band – 50MHz band (Amateur bands only)

          70MHz – 70.5MHz (UK Amateur bands only

RX Frequency Range: 30KHz – 75MHz (Operating)

1.8MHz – 29.699999MHz (Specified performance, Amateur bands only)    

50MHz – 53.999999MHz (Specified performance, Amateur bands only)    

70MHz – 70.499999MHz (Specified performance, UK Amateur bands

Emission Modes: A1A(CW), A3E(AM), J3E(LSB/USB), F3E(FM)

Supply Voltage: DC13.8V ±15%

Power Output: 5 - 100W (5 – 25W AM Carrier)

Dimensions (W x H x D):    9.4” x 3.1” x 9.7” (239 x 80 x 247mm)

Weight (Approx.):               9.92lbs (4.5kg)