YAESU - MD-100A8X - DESKTOP MICROPHONE FOR YAESU RADIO TRANSCEIVERS - DOUBLE CONNECTOR: RJ-45 AND ROUND

Yaesu MD-100A8X Dynamic Desk Microphones are the latest version of the venerable MD-100 Series and deliver your voice with punch and clarity.

These attractive cardioid desk mics have been a standard Yaesu transceiver accessory for many years, with features that enhance your station operations. Their selectable low-cut filtering and high-emphasis active filtering allow you to tailor the microphone response for optimum voice clarity or DX punch. These MD-100A8X microphones are designed for base station operation with the latest Yaesu HF Transceivers.

The base of the MD-100A8X includes a large push-to-talk (PTT) switch and latching button, along with a large rotary up/down, slow/fast control for scanning. Jacks and cabling are provided to accommodate transceivers having either RJ-45 or round 8-pin MIC jacks.

A multi-axis pivoting mount lets you adjust the horizontal and vertical position of the microphone to accommodate various locations and heights, or you can remove the microphone from the base and use it independently (an auxiliary toggling PTT button is provided, but the audio filtering and scan controls cannot be used).

The OFF position on the Low Cut Switch provides flat-audio-characteristic transmit audio. Position 1 attenuates low audio tones, for improved clarity in moderate band conditions, or if you have a naturally deep voice. Position 2 attenuates low audio tones more than Position 1, for improved clarity in noisy band conditions. To work contest pileups, the HIGH EMPHASIS filter provides even crispier audio.

Note: The Low Cut Switch is ignored when the HIGH EMPHASIS switch is ON, and when the MAIN switch is set to THRU.

Yaesu MD-100A8X details:

* Transducer Type: Dynamic 
* Frequency Response: 100 to 5000Hz (-6dB) 
* Audio Characteristic Controls 
* Low Cut Off Position: Standard Frequency Response 
* Low Cut Position 1: -3dB roll-off from 1000 to 150Hz 
* Low Cut Position 2: -3dB roll-off from 1000 to 300Hz 
* High Emphasis: plus 6dB at 3000Hz 
* Sensitivity: -75 plus/minus 3dB @ 1 kHz and 500 ohms 
* PTT Switch
* PTT Lock Switch 
* Scanning Control (only for specific transceivers) 
* Impedance: 500 ohms 
* Base (W x H x D, in.) 4.4 x 6.14 x 5.94 (w/o microphone) 
* Microphone 1.67 in. dia. x 7.44 in. 
* Weight (approximate, lbs.) 1.48 (w/o cable) 

Note:
Do NOT use this microphone on the following: FT-2400H/-7400 series, FT-2500 or FT-8500. Damage may result from modular jack wiring incompatibility.