PROSISTEL - PST-1524TV - TRAPPED MULTI-BAND DIPOLE FOR 10-15-20-40 METERS IN A "V" CONFIGURATION

Very robust construction, with stainless steel hardware.
The traps are made with high insulation copper wire wound on fiberglass supports, and allow use of powers up to 2 kW p.e.p. SSB.

TECHNICAL FEATURES:

APPLICABLE POWER: 2 kW p.e.p.

Arms length: 6 m, projection on the ground 4 m per arm

Standard mounting on masts from 40 to 50 mm, or 60 mm optional

Suggested ground clearance at least 5 m, but works well even at 2 m

The antenna does not require guying

Weight: 8 kg

Balun: Optional - See List of antenna accessories

6 METERS (50 MHz) KIT: optional - - See List of antenna accessories  (PLEASE NOTE:
THE BALUN TO BE USED ON THE "V" ANTENNA WITH THIS EXPANSION KIT MUST REACH 50 MHz.
THE PST-1,5KY MODEL IS COMPATIBLE).

PROSISTEL - PST-152TV - TRAPPED MULTI-BAND DIPOLE FOR 10-15-20 METERS IN A "V" CONFIGURATION 

Very robust construction, with stainless steel hardware.
The traps are made with high insulation copper wire wound on fiberglass supports, and allow use of powers up to 2 kW p.e.p. SSB.

TECHNICAL FEATURES:

APPLICABLE POWER: 2 kW p.e.p.

Arms length: 4 m, projection on the ground 3 m per arm

Standard mounting on masts from 40 to 50 mm, or 60 mm optional

Suggested ground clearance at least 5 m, but works well even at 2 m

The antenna does not require guying

Weight: 7 kg

Balun: Optional, 1:1 RATIO REQUIRED - See List of antenna accessories

6 METERS (50 MHz) KIT: optional - - See List of antenna accessories (PLEASE NOTE:
THE BALUN TO BE USED ON THE "V" ANTENNA WITH THIS EXPANSION KIT MUST REACH 50 MHz.
THE PST-1,5KY MODEL IS COMPATIBLE).

PROSISTEL - PST-273TV - TRAPPED MULTI-BAND DIPOLE FOR 12-17-30 METERS IN A "V" CONFIGURATION

Very robust construction, with stainless steel hardware.
The traps are made with high insulation copper wire wound on fiberglass supports, and allow use of powers up to 2 kW p.e.p. SSB.

TECHNICAL FEATURES:

APPLICABLE POWER: 2 kW p.e.p.

Arms length: 5.5 m, projection on the ground 4 m per arm

Standard mounting on masts from 40 to 50 mm, or 60 mm optional

Suggested ground clearance at least 5 m, but works well even at 2 m

The antenna does not require guying

Weight: 9 kg

Balun: Optional, 1:1 RATIO REQUIRED - See List of antenna accessories

6 METERS (50 MHz) KIT: optional - - See List of antenna accessories (PLEASE NOTE:
THE BALUN TO BE USED ON THE "V" ANTENNA WITH THIS EXPANSION KIT MUST REACH 50 MHz.
THE PST-1,5KY MODEL IS COMPATIBLE).

Very robust construction, with stainless steel bolts. The high insulation copper wire traps with fiberglass supports allow use even with powers up to 2 kW p.e.p. SSB

6 METER (50 MHz) BAND EXPANSION KIT FOR PROSISTEL "V" ANTENNAS, MODELS PST-1524TV, PST-152TV, PST-24TV, PST-273TV, PST-274TV

PLEASE NOTE:
THE BALUN TO BE USED ON THE "V" ANTENNA WITH THIS PRODUCT MUST REACH 50 MHz.
THE PST-1,5KY MODEL IS COMPATIBLE.

FOR HIGHER POWER THE COMET CBL-2500 BALUN CAN BE USED

PROSISTEL - PST-274TV - TRAPPED MULTI-BAND DIPOLE FOR 12-17-40 METERS IN A "V" CONFIGURATION

Very robust construction, with stainless steel hardware.
The traps are made with high insulation copper wire wound on fiberglass supports, and allow use of powers up to 2 kW p.e.p. SSB.

TECHNICAL FEATURES:

APPLICABLE POWER: 2 kW p.e.p.

Arms length: 6.5 m, projection on the ground 4.5 m per arm

Standard mounting on masts from 40 to 50 mm, or 60 mm optional

Suggested ground clearance at least 5 m, but works well even at 2 m

The antenna does not require guying

Weight: 9 kg

Balun: Optional, 1:1 RATIO REQUIRED - See List of antenna accessories

6 METERS (50 MHz) KIT: optional - - See List of antenna accessories (PLEASE NOTE:
THE BALUN TO BE USED ON THE "V" ANTENNA WITH THIS EXPANSION KIT MUST REACH 50 MHz.
THE PST-1,5KY MODEL IS COMPATIBLE).

PST-1524VC - 10-15-20-40 METERS VERTICAL 4 BAND ANTENNA - No wire radials, has just 4 rigid radials 2 m long.

Multi band trapped vertical antenna.
Version with loaded rigid radials, possibly also usable with optional wire radials.

The version with rigid radials can be installed low or high.
Good bandwidth.

The use of independent traps allows a fine tuning on each single band.

All versions are equipped with a short-circuit base coil which, in addition to eliminating the risks deriving from electrostatic discharges, reduces the noise, typical of all verticals, by about 12 dB, while keeping the performance unchanged.

Designed for winds up to 130km / h.

Technical specifications:

• Height: about 6 m
• Max loaded radial length = 2 m
• Weight = 5 kg
• Area exposed to the wind = 0.1 sqm
• Max wind resistance = 130 km / h
• Accepts 40-50 mm mast (60 mm on request)
• 6060T6 aluminum, stainless steel bracket and bolts
• Applicable power: : 2 kW p.e.p. SSB
• Connector: SO-239 (for PL-259)

• Usable Bandwidth:

  40m = about 150 kHz 

  20m = about 250 kHz

  15m = total coverage

  10m = about 800 kHz 

PST-152VC - 10-15-20 METERS VERTICAL 3 BAND ANTENNA - No wire radials, has just 4 rigid loaded radials 2 m long.

Multi band trapped vertical antenna.
Version with loaded rigid radials, possibly also usable with optional wire radials.

The version with rigid radials can be installed low or high.
Good bandwidth.

The use of independent traps allows a fine tuning on each single band.

All versions are equipped with a short-circuit base coil which, in addition to eliminating the risks deriving from electrostatic discharges, reduces the noise, typical of all verticals, by about 12 dB, while keeping the performance unchanged.

Designed for winds up to 130km / h.

Technical specifications:

• Height: about 4 m
• Max loaded radial length = 2 m
• Weight = 4 kg
• Area exposed to the wind = 0.09 sqm
• Max wind resistance = 130 km / h
• Accepts 40-50 mm mast (60 mm on request)
• 6060T6 aluminum, stainless steel bracket and bolts
• Applicable power: : 2 kW p.e.p. SSB
• Connector: SO-239 (for PL-259)

• Usable Bandwidth:

  20m = about 250 kHz

  15m = total coverage

  10m = about 800 kHz 

PST-273VC - 12-17-30 METERS VERTICAL 3 BAND ANTENNA - No wire radials, has just 4 rigid loaded radials 2 m long. 

Multi band trapped vertical antenna.
Version with loaded rigid radials, possibly also usable with optional wire radials.

The version with rigid radials can be installed low or high.
Good bandwidth.

The use of independent traps allows a fine tuning on each single band.

All versions are equipped with a short-circuit base coil which, in addition to eliminating the risks deriving from electrostatic discharges, reduces the noise, typical of all verticals, by about 12 dB, while keeping the performance unchanged.

Designed for winds up to 130km / h.

Technical specifications:

• Height: about 5.3 m
• Max loaded radial length = 2 m
• Weight = 5 kg
• Area exposed to the wind = 0.1 sqm
• Max wind resistance = 130 km / h
• Accepts 40-50 mm mast (60 mm on request)
• 6060T6 aluminum, stainless steel bracket and bolts
• Applicable power: : 2 kW p.e.p. SSB
• Connector: SO-239 (for PL-259)

• Usable Bandwidth:

  12m = total coverage

  17m = total coverage

  30m = total coverage

PST-248VF - 20-40-80 METERS VERTICAL 3 BAND ANTENNA - With 1/4 wave long radials for each band, included in the box

Multi band trapped vertical antenna.

The use of independent traps allows a fine tuning on each single band.

Equipped with a short-circuit base coil which, in addition to eliminating the risks deriving from electrostatic discharges, reduces the noise, typical of all verticals, by about 12 dB, while keeping the performance unchanged.

Designed for winds up to 130 km/h when used with 3 guy wires, included in the box.

Technical specifications:

• Height: about 11.3 m
• Weight = 6.5 kg
• Area exposed to the wind = 0.09 sqm
• Max wind resistance = 130 km / h with 3 included guy wires
• Accepts 40-50 mm mast (60 mm on request)
• 6060T6 aluminum, stainless steel bracket and bolt
• Applicable power: : 2 kW p.e.p. SSB
• Connector: SO-239 (for PL-259)

• Usable Bandwidth:

  20m = total coverage

  40m = total coverage

  80m = about 120 kHz 

COMET - CHV-5A -COMPACT DIPOLE FOR 5 BANDS: 7, 14 o 18, 21, 28, 50 MHz - CAN BE MOUNTED IN DIFFERENT CONFIGURATIONS

Comet CHV-5A, upgraded version of the CHV-5X, compact dipole antenna for 7, 14 or 18, 21, 28, 50 MHz.

FEATURES:

• Easily assembled in ‘V’, ground-plane or horizontal configuration.
• It can also be used for portable operations with lightweight design.
• Easy to adjust in frequency
• Wideband and high-power balun CBL-2500 included!
• New 18 MHz band element is added, selectable as an alternative to 14 MHz band type.
• Can be mounted on horizontal masts such balcony handrails

TECHNICAL SPECIFICATIONS:

• Antenna type : Center loading half wave dipole
• Gain: approx. 2.15 dBi (all-band)
• Max. power: 7/14 or 18 MHz: 150W (SSB), 21/28/50 MHz: 220W (SSB)
• VSWR: 1.5 or less (at center freq. each band)
• Impedance: 50 Ohm
• Connector: M-J
• Mounting mast diameter: Round pipe Ø 30-62 mm, or square 25-60 mm
• Max. wind survival: 30m/sec
• Horizontal length: approx. 4.0 m
• Weight: approx. 2.8 kg (each element: approx. 0.9 kg)
• Includes English installation manual