BELDEN - H155 - CAVO COASSIALE 50 OHM

Scorte disponibili

Prezzo originale 2,85 €
1,80 / metro/i
Risparmiate 37 %
Prezzo comprensivo di IVA, più spedizione


Modalità di spedizione disponibili: CORRIERE MERCE ASSICURATA, RITIRO DI PERSONA PRESSO IL NOSTRO NEGOZIO FISICO, CORRIERE STANDARD, CORRIERE MERCE PESANTE o VOLUMINOSA, CORRIERE MERCE PESANTE o VOLUMINOSA ASSICURATA, EUROPE 1 - SMALL PARCEL (UP TO 10 KG.) - NO INSURANCE, EUROPE 2 - LARGE PARCEL (OVER 10 KG.) - NO INSURANCE, EUROPE 1 - SMALL PARCEL - (UP TO 10 KG) - WITH INSURANCE, EUROPE 2 - LARGE PARCEL (OVER 10 kg) WITH INSURANCE, CORRIERE STANDARD ISOLE MINORI E VENEZIA LAGUNA (fino a 10 kg), CORRIERE MERCE ASSICURATA ISOLE MINORI E VENEZIA LAGUNA (fino a 10 kg)

BELDEN - H155 - CAVO COASSIALE A 50 OHM - DOPPIO SCHERMO - BASSA ATTENUAZIONE - SCHEDA TECNICA SCARICABILE 

Product Overview

Environmental Space: Indoor - Euroclass Eca
Suitable Applications: 50 Ohm low loss coaxial transmission cable designed according European Standard EN 50117-1; Operating frequencies between 5 and 6000 MHz

Physical Characteristics (Overall)

Conductor
Stranding Material Construction n x D Nominal Diameter Diameter +/- Tolerance No. of Coax
Stranded BC - Bare Copper 19x0.28 mm 1.41 mm 0.03 mm 1
Conductor Count: 1
AWG Size: 16
Insulation
Type Material Nominal Diameter Diameter +/- Tolerance
Dielectric Foamed Polyethylene 3.9 mm 0.15 mm
Insulation, Table Note: Centricity min. 85%
Outer Shield Material
Type Layer Material Coverage [%] Min. Overlap Nominal Diameter Diameter +/- Tolerance Coverage +/- Tolerance
Tape 1 Aluminum / Polyester / Aluminum   2 mm      
Braid 2 Tinned copper 80 %   4.5 mm 0.25 mm 5 %
Outer Jacket Material
Material Nominal Diameter Diameter +/- Tolerance
PVC - Polyvinyl Chloride 5.4 mm 0.2 mm

Construction and Dimensions

Min Elongation at Breakof Jacket: 150 %
Min Tensile Strength of Jacket: 12.5 MPa

Electrical Characteristics

Conductor DCR
Max. Conductor Loop Max. Inner Shield DCR Max. Shield DCR
32.4 Ohm/1000ft 15.4 Ohm/km 17 Ohm/km
Capacitance
Capacitance Tolerance Nom. Capacitance Conductor to Shield
3 pF/m 84 pF/m
Impedance
Nominal Characteristic Impedance Nominal Characteristic Tolerance Regularity of Impedance
50 Ohm 3 Ohm Min. 40 dB
High Frequency (Nominal/Typical)
Frequency [MHz] Nom. Insertion Loss
5 MHz 2.5 dB/100m
50 MHz 6.9 dB/100m
100 MHz 9.1 dB/100m
230 MHz 13.4 dB/100m
400 MHz 18 dB/100m
800 MHz 26.1 dB/100m
862 MHz 27.3 dB/100m
1000 MHz 29.6 dB/100m
1350 MHz 34.9 dB/100m
1750 MHz 40.3 dB/100m
2150 MHz 46 dB/100m
2400 MHz 49.1 dB/100m
3000 MHz 56.3 dB/100m
3600 MHz 62.9 dB/100m
4200 MHz 69.1 dB/100m
4800 MHz 75.1 dB/100m
5400 MHz 80.8 dB/100m
6000 MHz 86.5 dB/100m
Delay
Nominal Velocity of Propagation (VP) [%] Velocity of Propagation Tolerance
80 % 2 %
High Freq
Element Frequency [MHz] Min. RL (Return Loss) [dB]
  5 - 30 MHz 20 dB
  30 - 470 MHz 20 dB
  470 - 1000 MHz 18 dB
  1000 - 2000 MHz 16 dB
  2000 - 3000 MHz 15 dB
for information only 3000 - 6000 MHz 15 dB
High Freq Table Note: In each frequency band, 3 peak values up to 4 dB lower are allowed
Screening
Frequency [MHz] Min. Screening Attenuation
30 - 1000 MHz 85 dB
Voltage
Voltage Test Dielectric
2 kV DC

Temperature Range

Installation Temp Range: -5°C To +50°C
Storage Temp Range: -15°C To +70°C
Operating Temp Range: -15°C To +70°C

Mechanical Characteristics

Max Recommended Pulling Tension: 100 N
Min Bend Radius (W/o Pulling Strength): 60 mm
Crush Resistance: Max. 1% (load of 700N) N
Adhesion Dielectric: 5-50 N at 25 mm N

Standards

CPR Euroclass: Eca
CENELEC Compliance: EN 50117-1, EN 50117-2-4 and EN 50290-2-20
RG Type: 58/U Type

Flammability, LS0H, Toxicity Testing

ISO/IEC Flammability: IEC 60332-1-2

 

Accessori

Prodotto Nota Stato Prezzo
AMPHENOL - PL259 - CONNETTORE ORIGINALE AMPHENOL - PL259 - CONNETTORE ORIGINALE
6,95 € *

Foglio dati prodotto

UG176 - RIDUTTORE PER PL-259 o N200 e H155 UG176 - RIDUTTORE PER PL-259 o N200 e H155
1,00 € *
CO.UHF.54M-S - PL-259 PER CAVI 5,4 mm CO.UHF.54M-S - PL-259 PER CAVI 5,4 mm
6,20 € *
CO.N.54M-S - N SPINA PER CAVI 5,4 mm CO.N.54M-S - N SPINA PER CAVI 5,4 mm
6,10 € *
HSP - SERVIZIO CABLAGGIO CAVI HSP - SERVIZIO CABLAGGIO CAVI
5,00 € *
HSP - 021022 - N FEMMINA PER RG58 / H155 HSP - 021022 - N FEMMINA PER RG58 / H155
8,00 € *
FORBICI SPELLA E TAGLIA CAVI FORBICI SPELLA E TAGLIA CAVI
19,95 € *
*
Prezzi comprensivi di IVA più spedizione
Visualizza i dettagli sugli accessori

I clienti che hanno comprato questo prodotto hanno anche comprato

*
Prezzi comprensivi di IVA più spedizione

Cerca questa categoria: CAVI COASSIALI