HY-GAIN - V-2R - 2 x 5/8 COLLINEAR ANTENNA, TUNEABLE FROM 138 TO 174 MHz - D.C. GROUNDED, PROTECTED AGAINST STATIC CHARGES

Radiating elements are two collinear ⅝ waves fed in phase, derived from the famous extended double zepp design.
2 sets of ¼ wave radials properly decouple lower radiator from the mast.
SO-239 CONNECTOR, handles 500 Watts.
9 ft. tall.

Wind survival: 105 mph

Gain: 5.2 dBi

HY-GAIN - V-4R - 2 x 5/8 COLLINEAR ANTENNA, TUNEABLE FROM 400 TO 475 MHz - D.C. GROUNDED, PROTECTED AGAINST STATIC CHARGES

Radiating elements are two collinear ⅝ waves fed in phase, derived from the famous extended double zepp design.
2 sets of ¼ wave radials properly decouple lower radiator from the mast.
N CONNECTOR, handles 500 Watts.
46 inches tall.
Wind survival (no ice): 230 mph !

Gain: 5.2 dBi

TAGRA - GPC-160 - 2 x 5/8 COLLINEAR BASE VERTICAL ANTENNA - COMMERCIAL VHF BAND: 158-166 MHz

TECHNICAL SPECIFICATIONS

• Operating frequency: 158-166 MHz
• Type: 2 vertical elements 5/8 wave
• Configuration: Collinear
• Gain: 7.65 dB
• Maximum applicable power: 500 W
• Impedance: 50 Ohm
• Vertical radiator length: 2.8 m.

BUTTERNUT - 2MCV - 2 SECTIONS COLLINEAR ANTENNA FOR 2 METERS BAND - OPERATING FROM 144 TO 148 MHz

The exclusive and patented TROMBONE (registered trademark) phasing sections antennas offer high gain and reliability in the worst weather conditions. There are no reels or internal connectors that can be detached.
There are no isolators that can break.
The whole radiating system consists of telescopic sections of special machined metal alloy. Operating in short-circuit with earth for maximum protection against lightning and electrostatic discharges that afflict other types of collinear antennas.
The feeding takes place by means of adjustable gamma-match for the lower S.W.R. on the desired frequency.
The resonant radials decouple the radiator and its load-bearing structure and the supply line in order to eliminate unwanted high radiation angles.
Everything needed for assembly is made of stainless steel.

TECHNICAL SPECIFICATIONS

• Height: 2.9 m
• Shipping Weight: 1.4kg
• Feedpoint impedance: 50 ohms (accepts PL-259)
• S.W.R. at the resonance: 1.1: 1 or less
• Wind resistance: 98 mph
• Gain: 5dBi
• Max. power: legal limit

DIAMOND - D3000N - SUPER DISCONE ANTENNA TO RECEIVE 25-3000 MHz AND TRANSMIT 50-1200 MHz, INCLUDING HAM BANDS

PROXEL - D-130 - DISCONE ANTENNA TO RECEIVE 0,5-1300 MHz AND TRANSMIT ON  50-144-430-940 AND 1200 MHz

SIRIO - SD 3000 U - DISCONE ANTENNA - RX: 300-3000 MHz - TX: (@ ROS ≤2): 340-535, 545-960, 1180-1380, 1660-1910, 1980-3000 MHz

SIRIO - GP 1801C - VERTICAL HIGH GAIN ANTENNA 1710-1880 MHz - 1/4λ + 2x5/8λ COLLINEAR: 6 dBi - 8.15 dBi

UHF collinear Ground Plane antenna suitable for the base station service covering the frequency range of 1710-1880 MHz (DCS and PCN 1800 systems). 

The main whip and the radials are made of 17/7 PH stainless steel and its base is of chromed brass to get the best robustness. 
Easy to fit, it is suitable for a handy installation everywhere.

Features:

• Base station antenna, Omnidirectional
• Mono-band
• GP 1801 C: high-gain
• Made of anodized aluminium alloy
• Stainless steel hardware and radials
• Equipped with anodized aluminium bracket for an easy side mast installation
• 17/7 PH stainless steel spring whip
• for GSM 1.8 and DCS 1.8 systems

Electrical Data

• Type: GP 1801 C: 1/4λ + 2x5/8λ colinear
• Frequency range: 1710-1880 MHz for GSM 1.8 and DCS 1.8
• Impedance: 50Ω
• Radiation (H-plane): 360° omnidirectional
• Radiation (E-plane): GP 1801 C: beamwidth @ -3 dB = 30°
• Radiation angle: 0°
• Polarization: linear vertical
• Gain: GP 1801 C: 6 dBi - 8.15 dBi
• SWR in bandwidth: TX-band ≤ 1.4, RX-band ≤ 2.2
• Max. power (CW) 30°C: 20 Watts
• Connector: N-female, gold plated central pin

Mechanical Data

• Materials: Aluminium, Chromed Brass, Stainless Steel
• Wind load / resistance: 11N @ 150 Km/h / 180 Km/h
• Wind surface: 0.01 m²
• Height (approx.): GP 1801 C: 550 mm
• Weight (approx.): 635 gr
• Radial length (approx.): 37 mm
• Mounting mast: Ø 35-54 mm

ECO - ART.52 - VERTICAL COLLINEAR ANTENNA - 144-148 MHz - GAIN: 7 dB - MAX. POWER: 250 W - 50 OHM IMPEDANCE

TECHNICAL SPECIFICATIONS:

• MAST REQUIRED: UP TO 40 mm.
• S.W.R. : 1: 1
• WIND RESISTANCE: max. 130 km / h
• IMPEDANCE: 50 OHM
• GAIN: 7 dB
• APPLICABLE POWER: 250W
• TOTAL LENGTH : 257 cm
• MATERIAL: ANTICORODAL ALUMINUM

SIRIO - SCO-2.4-6 - COLLINEAR 3×1/2 λ  VERTICAL OMNIDIRECTIONAL - FREQUENCY: 2.3-2.5 GHz - GAIN: 6 dBi - CONNECTOR: N female

Features

• Base station antenna, Omnidirectional
• Mono-band, High-gain
• Protection from static discharges DC-ground
• High quality whip made of PCB protected by fiberglass tube
• For WLAN system

Electrical Data

• Type: 3x1/2λ colinear dipole array
• Frequency range: 2.3-2.5 GHz for WLAN system
• Impedance: 50Ω
• Radiation (H-plane): 360° omnidirectional
• Radiation (E-plane): beamwidth @ -3 dB = 22°
• Radiation angle: 0°
• Polarization: linear vertical
• Gain: 3.9 dBd - 6 dBi
• SWR in bandwidth: ≤ 1.5:
• Max. power (CW) @ 30°C: 20 Watts
• Grounding protection: All metal part are DC-grounded, the inner conductor shows a DC-short
• Connector: N-female

Mechanical Data

• Materials: Aluminium, Fiberglass, Brass, PCB
• Wind load / resistance: 11 N @ 150 Km/h / 200 Km/h
• Wind surface: 0.01 m²
• Height (approx.): 325 mm
• Weight (approx.): 360 gr
• Operating temperature: -40° C to +80° C
• Mounting mast: Ø 35-54 mm