HY-GAIN - 5146710 - HEAVY DUTY LOWER SUPPORT FOR HAM-IV, HAM-V, T2X TAILTWISTER ROTATORS AND SIMILAR TYPES

For masts over 2" diameter and large antennas

HY-GAIN - 5147210 - NORMAL DUTY LOWER SUPPORT FOR CD-44, CD-45, HAM-IV, HAM-V ROTATORS AND SIMILAR TYPES

YAESU - G-1000DXC - ANTENNA ROTATOR IDEAL FOR HEAVY-DUTY APPLICATIONS - VERSION WITH PC INTERFACE SOCKET

CABLE CONNECTOR KIT INCLUDED

"C" means the rotator is boxed with the Connector KIT

This new, high-performance rotator is ideal for heavy-duty applications.
Its slim-line constructions is ideal for many crank-up tower installations.
Rotation range: 450°, with presets.

FEATURES

COMPLETE WITH ORIGINAL YAESU CONNECTORS

GET FURTHER INFORMATION BY DOWNLOADING THE PRODUCT DATA SHEET (UNDER THE PRICE TAG)

YAESU - GC-038 - MAST CLAMPS - OPTIONAL ACCESSORY FOR ALL YAESU ROTATORS - REQUIRED FOR POLE MOUNTING OR AS A REPLACEMENT

Mast clamps are required if the Rotator is to be pole mounted, or as replacement top set.

Note:- Pole size 38mm ( 1.5" ) to 63.5mm ( 2.5" )

These are recommended for the G450 to G1000 range but will fit all Yaesu rotator models.

These clamps are of a medium duty cast aluminium and have 2 sets of bolts each side.

YAESU - GC-048 - HEAVY DUTY MAST CLAMPS - OPTIONAL ACCESSORY FOR ALL YAESU ROTATORS
- REQUIRED FOR POLE MOUNTING OR AS A REPLACEMENT -

Mast clamps are required if the Rotator is to be pole mounted, or as replacement top clamps.

Note:- Pole size 48.3mm ( 1.90" ) to 63.5mm ( 2.5" )

These are recommended for the G-2800 range but will fit all Yaesu rotator models.

These clamps are of a heavy duty cast aluminium and have 3 sets of bolts each side.

YAESU - G450CDC - ANTENNA ROTATOR - LIGHT/MEDIUM DUTY - NEW MODEL WITH DC MOTOR - CABLE CONNECTOR KIT INCLUDED

"C" means the rotator is boxed with the Connector KIT

Yaesu G-450CDC Medium-Duty Rotator Systems are the entry-level rotator and controller that are perfect for small HF beams, a tri-bander or VHF and UHF antennas up to about 10 sq. ft. of tower-mounted wind load. A lesser wind load can be handled when mounting the G-450CDC on top of a mast with the optional lower mast bracket, GC-038. 

Rotate Amateur and professional antennas with the Yaesu's handsome desktop remote control console, featuring a compass-style indicator at the station operating position. The G-450CDC rotators provide 450 degrees of azimuth rotation in just over one minute and handle masts of 1.25 to 2.48 in. outside diameter and, when tower mounted, a total vertical mast load up to 200 lbs.

In the Yaesu G-450CDC, the clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions.

 

YAESU - G650C - ANTENNA ROTATOR - MEDIUM DUTY - COMPLETE WITH CONNECTOR KIT FOR CONNECTING CABLE

• Torque 58 Nm
• Braking torque 490 Nm
• Max. bending moment 600 Nm
• Max. load (weight) 100 kg
• Rotation angle 450 450 °
• Time of circulation 63 sec
• Mast Diameter 32-63 mm
• Installation on platform Yes Y
• Voltage 24 Volt
• Number of control wires 6
• Weight 3,5 kg
• Control Unit with 360° dial Yes

​GET FURTHER INFORMATION BY DOWNLOADING THE PRODUCT DATA SHEET (UNDER THE PRICE TAG)

YAESU - G-800DXC - ANTENNA ROTATOR - MEDIUM DUTY - COMPLETE WITH CONNECTOR KIT FOR CONNECTING CABLE

"C" means the rotator is boxed with the Connector KIT

Yaesu G-800DXA Medium Heavy-Duty Rotator Systems are azimuth positioners designed to rotate large tower-mounted amateur and professional antenna arrays under remote control from the station's operating position. These systems feature attractive compass-dial position indication controllers, with a connector port for optional computer interface for automated directional antenna positioning control.

Yaesu's G-800DXA rotator design utilizes 100 heavy 7/16-in. dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear and practically eliminates the possibility of destructive water entry: There is no shaft hole in the top of the housing. Instead of the usual AC motor drive used in older rotator designs, the G-800DXA use a variable-voltage DC motor, removing the need for a large starting capacitor with its potential for failure exposed to outside temperature variations. 

The factory-lubricated rotator unit is housed in melamine resin-coated die-cast aluminum, intended to provide maintenance-free operation under all climatic conditions. A mast alignment gauge on the rotator housing simplifies accurate mechanical alignment during installation. Tower mounted, this model handles over 20 sq. ft. of antenna wind load and over 400 lbs. of vertical mast load. Installation is required for included plug connectors on to the installer supplied 6-conductor control cable; 20 AWG for lengths less than 125 ft. and 18 AWG over 125 ft. Console power is 220 volts AC for units sold in ITALY.

The handsome desktop controller provides 360 degrees radial indication of actual antenna azimuth bearing. You can select rotation time over 360 degrees from 40 to 100 seconds on the G-800DXA, and preset a desired heading for the rotator, to which it then turns automatically. The operator may select the stop heading, the compass bearing through which the rotator cannot be turned, which is most convenient for their station location and operation, allowing full rotation through north, south or both, if desired. In any case, 90 degrees overlapping rotation allows rotation through the selected stop heading for 450 degrees of total rotation. These rotators are intended for mounting to an accessory shelf inside a support tower (not supplied), at least 1-meter (40 in.) below the top of the tower.

PROSISTEL - PST641D - ANTENNA ROTATOR - INDUSTRIAL GRADE - WORM GEAR DESIGN TECHNOLOGY - GREAT BRAKE RESISTANCE - USB PORT

MAIN FEATURES:

• Antenna rotator suitable for medium-light loads
• Worm gear technology irreversible to mast torsion.
• Great brake resistance.
• Excellent torsion power with 12VDC direct current motor.
• Soft start and soft stop with programmable ramp speed.
• PC control via USB port
• Two year guarantee
• Acceleration-deceleration ramp
• Variable speed + Preset
• Maximum rotation: 500 ° (70 ° + 360 ° + 70 °)
• Programmable limit switches
• Stop in SOUTH or NORTH programmable
• All settings are programmable from a PC with the supplied software

TECHNICAL SPECIFICATIONS:

• -    Max wind load area                                  1.2 m²
• -    Braking torque                                         1.959Kgcm = 192Nm
• -    Rotating torque                                        1.000Kgcm = 98Nm
• -    Max vertical load                                      350Kg   
• -    Motor voltage                                           12 VDC
• -    Rotating range                                         500° (70+360+70)
• -    Rotation speed                                        ~90 secondi per 360°
• -    Reading accuracy                                    ~1%  no backlash
• -    Antenna mast OD                                     48-50mm
• -    Operational temperature range (°C):     rotor unit          -40° ÷ +60°
•                                                                          control box      -20° ÷ +60°
• -    Storage temperature (°C):                        rotor unit          -40° ÷ +70°
•                                                                          control box      -25° ÷ +60°   
• -    Control box power input                          230VAC (115VAC) , 50-60Hz, 50VA
• -    Direction reading                                      Digital (potentiometer)
• -    Limits                                                         Electronic, adjustable by software
• -    Rotator cable                                             5 wires (2 x 1mm² + 3 x 0,5mm²)
• -    Weight  (rotator only)                               ~ 5 kg

Some details:

• - High strenght cast alluminium  gear box
• - Rugged and proven design.
• - Nickel chromium-molybdenum steel and bronze alloy gear running on balls bearings
• - No maitenance, life lubrificated.
• - High strength steel galvanized mast clamp.
• - Stainless steel bolts.
• - IP55

What does the package include?

• Rotator complete with mast clamp and stainless steel hardware
• Control box with power cable
• Connectors for the rotator cabl
• Instructions manual
• CD containing the configuration and control software
• Supplementary instructions for using the USB port

PROSISTEL ROTATOR FAMILY - SPECIFICATIONS BY MODEL

ROTATOR COMPARISON TABLE - MOST POPULAR MODELS

PROSISTEL - PST2051D - ANTENNA ROTATOR - INDUSTRIAL GRADE - WORM GEAR DESIGN TECHNOLOGY - GREAT BRAKE RESISTANCE - USB PORT

MAIN FEATURES:

• Antenna rotator suitable for medium-light loads
• Worm gear technology irreversible to mast torsion.
• Great brake resistance.
• Excellent torsion power with 12VDC direct current motor.
• Soft start and soft stop with programmable ramp speed.
• PC control via USB port
• Two year guarantee
• Acceleration-deceleration ramp
• Variable speed + Preset
• Maximum rotation: 500 ° (70 ° + 360 ° + 70 °)
• Programmable limit switches
• Stop in SOUTH or NORTH programmable
• All settings are programmable from a PC with the supplied software

TECHNICAL SPECIFICATIONS:

• -    Max wind load area                                  2.5 m²
• -    Braking torque                                         3000 kgcm = 294 Nm
• -    Rotating torque                                        2000 kgcm = 196 Nm
• -    Max vertical load                                      650 kg   
• -    Motor voltage                                           12 VDC
• -    Rotating range                                         500° (70+360+70)
• -    Rotation speed                                        ~90 secondi per 360°
• -    Reading accuracy                                    ~1%  no backlash
• -    Antenna mast OD                                     48-50mm
• -    Operational temperature range (°C):     rotor unit          -40° ÷ +60°
•                                                                          control box      -20° ÷ +60°
• -    Storage temperature (°C):                        rotor unit          -40° ÷ +70°
•                                                                          control box      -25° ÷ +60°   
• -    Control box power input                          230VAC (115VAC) , 50-60Hz, 50VA
• -    Direction reading                                      Digital (potentiometer)
• -    Limits                                                         Electronic, adjustable by software
• -    Rotator cable                                             5 wires (2 x 1mm² + 3 x 0,5mm²)
• -    Weight  (rotator only)                               ~ 10 kg
• -    Weight (control box)                                 about 5 kg

Some details:

• - High strenght cast alluminium  gear box
• - Rugged and proven design.
• - Nickel chromium-molybdenum steel and bronze alloy gear running on balls bearings
• - No maitenance, life lubrificated.
• - High strength steel galvanized mast clamp.
• - Stainless steel bolts.
• - IP55

What does the package include?

• Rotator complete with mast clamp and stainless steel hardware
• Control box with power cable
• Connectors for the rotator cabl
• Instructions manual
• CD containing the configuration and control software
• Supplementary instructions for using the USB port

PROSISTEL ROTATOR FAMILY - SPECIFICATIONS BY MODEL

ROTATOR COMPARISON TABLE - MOST POPULAR MODELS