HEAT-S-13 - HEAT SUPPRESSOR FOR M&P TYPE PL-259 AND N CONNECTORS - SUITABLE FOR 13 mm DIAMETER CABLES
 

EXTEND THE LIFE OF YOUR CABLES !

Pairing to ''N'' or ''UHF'' connectors for 10,3mm (.400") cables.

The result is an extension of the operational life of your valuable cables and a greater homogeneity of their performance in hot enviroments, as higher temperatures will affect attenuation. 

The benefits of our Heat-Suppressors will also be more evident for those who use high power linear amplifiers  for prolonged periods during contests. Cooling and stabilizing the cable, could be the ace in your sleeve!

 
INSTRUCTIONS: simply screw it into the bottom of the connector, after having removed the original ''screw on'' component.

M&P Heat Suppressor is provided with a O-ring and a teflon disk, protecting the cable jacket from the heat.

SUITABLE FOR:
- HYPERFLEX 13
- ULTRAFLEX 13

AND COMPATIBLE CABLES

CO.N.5M-S - N MALE PLUG CONNECTOR FOR 5 mm CABLES LIKE RG-58, M&P AIRBORNE 5, HF-195 AND COMPATIBLE CABLES

Why choose this connector?

• Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.

• Easy installation and welding instructions included in the package (no braid soldering needed).

• Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.

• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.

• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable 

Product dimensions: 2,1 cm x 3,7 cm

Wrench size: 11 mm & 13 mm (0.43 in & 0.51 in)

C.N.AC7M-90 - N MALE PLUG 90° CONNECTOR FOR 7.3 mm CABLES LIKE AIRCELL-7, ULTRAFLEX 7 AND OTHER COMPATIBLE CABLES

- USEABLE ALSO FOR HF-240 PVC SMALLER CABLE

C.N.BROAD50-M90 - 90° ANGLE N MALE PLUG CONNECTOR FOR 10.3 mm CABLES LIKE H1000, RG-213, HF-400 PE, HF-400 UF PVC, BROAD-PRO 50, ULTRAFLEX 10, HYPERFLEX 10, AIRBORNE 10 AND COMPATIBLE CABLES

HSP - 021047 - PANEL MOUNT N FEMALE CONNECTOR - DIAMOND SHAPED FLANGE - GOLD PIN - PROFESSIONAL LINE

Suitable as spare part for substitutions/repairs on receiving/transmitting radios 

CO.N.10M-S - SPECIAL TYPE N-MALE CONNECTOR FOR 10.3 mm DIAMETER CABLES - NEW CENTER PIN EASES SOLDERING

SUITABLE FOR:
- BELDEN H-1000
- BELDEN H-500
- HF-400PE
- HF-400UF
- RG-213 MIL-C17-F
- HYPERFLEX, ULTRAFLEX, AIRBORNE 10
- BROAD PRO50 C
- EXTRAFLEX BURY 10

AND 10.3 mm COMPATIBLE CABLES

 

Why choose this connector?

• Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.

• Easy installation (no braid soldering needed).

• Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.

• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.

• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable

By adding the HEAT SINK, you add longevity and consistency of performance (see ACCESSORIES).

CO.N.54M-S - N MALE PLUG CONNECTOR FOR 5.4 mm CABLES LIKE BELDEN H-155, M&P HYPERFLEX 5 AND COMPATIBLE CABLES

Why choose this connector?

• Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.

• Easy installation and welding instructions included in the package (no braid soldering needed).

• Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.

• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.

• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable 

Product dimensions: 2,1 cm x 3,7 cm

Wrench size: 11 mm & 13 mm (0.43 in & 0.51 in)

C.N.BROAD50-SL - SPECIAL SOLDERLESS TYPE N-MALE CONNECTOR FOR 10.3 mm DIAMETER CABLES - NEW CENTER PIN 

SUITABLE FOR:
- BELDEN H-1000
- BELDEN H-500
- HF-400PE
- HF-400UF
- RG-213 MIL-C17-F
- HYPERFLEX, ULTRAFLEX, AIRBORNE 10
- BROAD PRO50 C
- EXTRAFLEX BURY 10

AND 10.3 mm COMPATIBLE CABLES

 

Why choose this connector?

• Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.

• Easy installation (no soldering needed).

• Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.

• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.

• The new designed pin prevents soldering and the consequent heating, which sometimes damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable. 

Product dimensions: 2,0 cm x 4,5 cm

Wrench size: 17 mm & 18 mm

CO.N.13M-SL - SPECIAL TYPE N-MALE CONNECTOR FOR 12.7 mm DIAMETER CABLES - NEW CENTER PIN EASES SOLDERING OR MOUNT SOLDERLESS

SUITABLE FOR:

- HYPERFLEX 13
- ULTRAFLEX 13

AND 13 mm COMPATIBLE CABLES
 

Connectors provided with new designed PINs, created to meet the need of those who want:

- to solder the pin to the conductor (without transferring excessive heat),

- for convenience, a solderless installation (thank to the flexible fins). 

Two functions in the same connector, for the best operational flexibility!

Why choose this connector?

• Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.

• Easy installation and welding instructions included in the package (no braid soldering needed).

• Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.

• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.

• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable

Product dimensions: 2.1 cm x 5.4 cm

Wrench size: 18 mm (0,70 in)

By adding the HEAT SINK, you add longevity and consistency of performance (see ACCESSORIES).