LDG - RU-1:1 - UNUN 1:1 / R.F. CHOKE - Intended to help remove unwanted RF, cause of interference, from the coax cable shield

The RU-1:1 is a 1:1 Unun intended to help remove unwanted RF from the coax cable shield.
It is normally used as a common-mode RF choke for short coax cable runs or non-resonant antennas.
The RU-1:1 features SO-239 sockets for both input and output.

Specifications

• Configuration: 1:1 Unun
• Frequency Coverage: 1.8 to 30 MHz.
• Power Range: to 200 watts PEP
• Easy to weatherproof
• Enclosure size: 5 x 2.5 x 1.25 (measured in inches)
• Weight: 6 oz (with enclosure)

HSP - BU6-HP3 - BALUN RATIO: 6:1 - FREQUENCY: 1.6-54 MHz - INPUT IMPEDANCE: 50 OHM - POWER: 1.7 kW (3 kW p.e.p. SSB)

Particularly robust and reliable product, suitable to build wire antennas of the Windom type and similar off-center fed, asymmetrically fed wire antennas.

NOTE: Applicable power is always referred to a 1:1 SWR at resonance

Weight: 280 g

HSP - BU6-HP1 - BALUN RATIO: 6:1 - FREQUENCY: 1.6-54 MHz - INPUT IMPEDANCE: 50 OHM - POWER: 500 W (1 kW p.e.p. SSB)

Particularly robust and reliable product, suitable to build wire antennas of the Windom type and similar off-center fed, asymmetrically fed wire antennas.

NOTE: Applicable power is always referred to a 1:1 SWR at resonance. 

Made to be versatile, as can be seen from the photographs.
The isolator can be removed according to convenience. T
The hardware is stainless steel and the cable lugs are silver-plated to facilitate soldering.

Length of the tube: 12 cm
Maximum tube width: 5 cm
Weight assembled: 265 g

COMET - CBL-2500 - BALUN 1: 1 - THREE-WIRE WINDING - OPERATING FREQUENCY: 1.8-56 MHz - APPLICABLE POWER: 2.5 kW p.e.p

New model in the Comet range, the CBL-2500 replaces the CBL-2000.
Comet has reinforced everything in this high power balun, the construction is very robust and able to offer many years of service.
The CBL-2500 accepts up to 2.5Kw PEP SSB of RF power, and the frequency range is from HF to 6 meters, typically 1.8 - 56 Mhz.
The base connector is the classic SO239 for PL-259, of the high power type.
USABLE FOR WIRE ANTENNAS, "V" ANTENNAS, BEAMS.

TECHNICAL SPECIFICATIONS:

• Comet CBL 2500 1:1 Balun
• Impedance: 50 ohms
• Ratio: 1: 1
• Connector: SO239 for PL-259
• Applicable power: 2.5 kW (P.E.P. SSB)
• Operating frequency: 1.8 - 56 MHz
• Dimensions: 86 x 54 x 158 mm (W x D x H)
• Weight: 210 g

PST-5KY - BALUN 1: 1 - APPLICABLE POWER: 5 kW p.e.p. - SUITABLE FOR YAGI ANTENNAS, HORIZONTAL AND "V" ROTARY DIPOLES

TECHNICAL DATA:

• OPERATING FREQUENCY: 1.5 - 30 MHz
• TYPE: VOLTAGE
• CORE: FERRITE
• CONNECTOR: SO-239
• MAXIMUM APPLICABLE POWER: 5 kW p.e.p. SSB

PST-1,5KY - BALUN 1: 1 - APPLICABLE POWER: 1.5 kW p.e.p. - SUITABLE FOR YAGI ANTENNAS, HORIZONTAL AND "V" ROTARY DIPOLES

TECHNICAL DATA:

• OPERATING FREQUENCY: 1.5 - 52 MHz
• TYPE: VOLTAGE
• CORE: FERRITE
• CONNECTOR: SO-239
• MAXIMUM APPLICABLE POWER: 1.5 kW p.e.p. SSB

PST-5KW - BALUN 1: 1 - APPLICABLE POWER: 5 kW p.e.p. - SUITABLE FOR WIRE ANTENNAS OF THE DIPOLE TYPE

TECHNICAL DATA:

• OPERATING FREQUENCY: 1.5 - 30 MHz
• TYPE: VOLTAGE
• CORE: FERRITE
• CONNECTOR: SO-239
• MAXIMUM APPLICABLE POWER: 5 kW p.e.p. SSB

PST-1,5KW - BALUN 1: 1 - APPLICABLE POWER: 1.5 kW p.e.p. - SUITABLE FOR WIRE ANTENNAS OF THE DIPOLE TYPE

TECHNICAL DATA:

• OPERATING FREQUENCY: 1.5 - 52 MHz
• TYPE: VOLTAGE
• CORE: FERRITE
• CONNECTOR: SO-239
• MAXIMUM APPLICABLE POWER: 1,5 kW p.e.p. SSB

CG ANTENNA - BL-01 - BALUN 1: 1 - IMPEDANCE: 50 OHM - APPLICABLE POWER: 100 W p.e.p. SSB - IDEAL FOR PORTABLE OPERATIONS

Stainless steel nuts and bolts
Weight: 65 g

KLM - BALUN 4:1 - 144-148 MHz - REPLACEMENT PART - 4:1 BALUN FOR KLM YAGI ANTENNAS - 2 kW p.e.p. max. power