RIGEXPERT - AA-3000 ZOOM - ANTENNA ANALYZER - COLOUR GRAPHIC DISPLAY - OPERATIONAL RANGE: 0.1-3000 MHz - BLUETOOTH
- To test, analyze, tune antennas and transmission lines -
*** CLICK ON "PRODUCT DATA SHEET" (CLOSE TO THE PRICE) TO DOWNLOAD THE COMPLETE USER MANUAL ***
The flagship Antenna and Cable analyzer with a range from 0.1 to 3000 MHz and a Big Blanview® ZOOM display.
Stay connected from Earth to space.
Perfect for amateur, professional, and commercial radio.
Check and adjust antennas quickly.
Measure cable length and velocity factor.
Set up 1/4-λ, 1/2-λ stubs.
Find cable faults in a snap.
Measure parameters of other RF elements.
Enjoy the Big sunlight-readable Blanview® display.
Trust the factory calibration.
Navigate the multilingual intuitive interface.
Get help at the push of a button with the built-in Helper.
Store OSL calibration data for future use.
INSIDE THE BOX:
- Antenna Analyzer - RigExpert AA-3000 ZOOM
- N Male to SO-239 (for PL-259) adaptor
- USB cable
- Soft case with straps
- User’s manual
- Ni-Mh rechargeable batteries (3 x AA)
- Separate Battery Charger
RigExpert AA-650 ZOOM, AA-1500 ZOOM, AA-2000 ZOOM and AA-3000 ZOOM are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.
Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-650 ZOOM, AA-1500 ZOOM, AA-2000 ZOOM and AA-3000 ZOOM attractive for professionals and hobbyists.
This family of analyzers is available in non-US version (with ability to display Smith chart) and US version (displaying a polar chart instead). WE SELL NON-US VERSIONS. US VERSIONS CAN BE BOOKED.
The following tasks are easily accomplished by using these analyzers:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
- Making coaxial lines or measuring their parameters
- Cable testing and fault location
- Measuring capacitance or inductance of reactive loads
TECHNICAL FEATURES
Measurement for systems
- 25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
- 1 to 10 in chart modes
- 1 to 100 in numerical modes
Display modes
- Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé)
- Optional open-short-load calibration
- R, X chart
- Return loss chart
- Smith chart
- SWR at single or multiple frequencies
- SWR chart
- SWR, return loss, R, X, Z, L, C at single frequency
- TDR chart (Time Domain Reflectometer)
- User OSL: 10 profiles available
RF output
- Connector type: N
- Output power: -10 dBm (at a load of 50 ohms)
- Output signal shape: square
Power
- Max. 5 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used
- Three 1.2V Ni-MH batteries, type AA
- Three 3.7V LiPo batteries, 14200
- When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
- 6x3 keys on the water-proof keypad
- 800×480 color Blanview® display
- Bluetooth Specification v.4.2, LE
- Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German
- USB connection to a personal computer
Dimensions
- 100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
- Silicone case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
Note
- Specifications are subject to change without notice
- Мade in Ukraine
Measurement for systems
- 25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
- 1 to 10 in chart modes
- 1 to 100 in numerical modes
Display modes
- Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé)
- Optional open-short-load calibration
- R, X chart
- Return loss chart
- Smith chart
- SWR at single or multiple frequencies
- SWR chart
- SWR, return loss, R, X, Z, L, C at single frequency
- TDR chart (Time Domain Reflectometer)
- User OSL: 10 profiles available
RF output
- Connector type: N
- Output power: -10 dBm (at a load of 50 ohms)
- Output signal shape: square
Power
- Max. 5 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used
- Three 1.2V Ni-MH batteries, type AA
- Three 3.7V LiPo batteries, 14200
- When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
- 6x3 keys on the water-proof keypad
- 800×480 color Blanview® display
- Bluetooth Specification v.4.2, LE
- Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German
- USB connection to a personal computer
Dimensions
- 100 × 230 × 55 mm, (4 × 9 × 2 in)
Accessories inside the box
- Silicone case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
Note
- Specifications are subject to change without notice
- Мade in Ukraine