R.F. SYSTEMS - DX 500/3 - TRIPLEXER - 30 kHz-520 kHz / 520 kHz-32 MHz / 32 MHz-550 MHz - ONLY FOR RECEIVING

The DX 500/3 indoor unit makes it possible to use the DX 500 (or other very wide band antenna) for several applications at the same time.

The longwave output covers 30 kHz – 520 kHz and is meant for a longwave receiver such as a Loran set, a NAVTEX receiver, a differential GPS receiver, a German Wetterdienst (Pinnenberg) receiver or similar longwave applications.

The medium- and shortwave output covers 520 kHz to 32 MHz and is meant for a communications/shortwave receiver.

The 3rd output covers 32 MHz to 550 MHz and is meant for VHF – UHF receiver applications such as a scanner, an amateur receiver, a FM broadcast radio or reception of marine radio in the 156 MHz band.

Naturally the DX 500/3 can be also used for other applications.

All three receivers operate if they are connected to their own antenna: thanks to the built-in triplexer there is no mutual influence or signal loss.
There is no need to connect all three receivers: the DX 500/3 can also be used with one or two receivers.

Naturally the optional SP–1 splitter can be connected to one or more outputs if more receivers have to be connected to one or
several outputs of the DX 500/3.

If you need to power an active antenna such as the DX-500, the DX 500/3 indoorunit works on 12 V dc supply voltage, but can be used on 230 V ac mains with the DX 500/ADAP mains adapter.

If you use a PASSIVE antenna there is no need to apply power to this triplexer. 

Of course you can use it also without powering it as a combiner for three different passive antennas to a single receiver connected to the ANTENNA socket, thus allowing for additional filtering at the input. 
 

DIMENSIONS: 90 x 90 x 53 mm