M2 - 70CM 4PT PD - 4 PORT 70 CM POWER DIVIDER

In stock

Old price 254.00 €
185.00
You save 27 %
Price incl. VAT, plus delivery


Available delivery methods: STANDARD delivery WITH INSURANCE, Pickup by customer in our physical shop, STANDARD DELIVERY IN ITALY, HEAVY (over 10 kg) OR BULKY GOODS - ONLY FOR DESTINATIONS IN ITALY!, HEAVY (over 10 kg) OR BULKY GOODS WITH INSURANCE - ONLY FOR DESTINATIONS IN ITALY!, EUROPE 1 - SMALL PARCEL (UP TO 10 KG) - NO INSURANCE, EUROPE 2 - LARGE / LONG OR OVER 10 KG PARCEL - NO INSURANCE, EUROPE 2 - LARGE / LONG OR OVER 10 kg PARCEL - WITH INSURANCE, CORRIERE STANDARD ISOLE MINORI E VENEZIA LAGUNA, CORRIERE MERCE ASSICURATA ISOLE MINORI E VENEZIA LAGUNA (fino a 10 kg)

M2 - 70CM 4PT PD - 70 CM. 4 PORT POWER DIVIDER - FREQUENCY: 420-450 MHz -  Aluminum Coaxial - 3 kW - 50 ohm -  N female connectors

70CM4PTPD_specs

 

M2 Antennas Power Dividers are non-isolation type dividers that serve as RF combiners and splitters for 50 ohm antennas and feedlines. They are carefully hand-crafted to achieve their design frequency range.

M2 Antennas Power Dividers are made with Type N female connectors so they have extremely low loss and constant impedance characteristics. Power Dividers are used in VHF, UHF and SHF arrays to impedance match two or four Loop or Yagi antennas that are fed in phase, separated by the proper stacking spacing, and pointed in the same direction. As compared to a single antenna, this technique can yield 3 dB gain for two antennas and nearly 6 dB gain for four antennas, less only the minor losses of the phasing lines and the power divider. Each pair of stacked antennas nearly doubles the effective radiated power of the station. 

M2 Antennas Power Dividers for 144 MHz, 430 MHz and 1.2 GHz are constructed with aluminum tubing or aluminum blocks and solid metal center conductors to make coaxial lines with air dielectric, so their losses are nearly immeasurable. These two-port and four-port Power Dividers feature aluminum brazed joints, machined end blocks and 'O' ring sealed coaxial connectors of the highest quality. Each M2 Antennas Power Dividers has less than 0.1 dB loss and handles 3 kW of RF power. Two-port dividers are used for a pair of Horizontal Omni Loops or a pair of Yagi antennas with equal length of 50 ohm low loss coaxial cables with Type N connectors. Two-port power dividers are also used in arrays of eight Yagis or multiples, to combine each pair of four antennas that are served by four-port Power Dividers. 

NOTE:
IMAGES ARE FOR EXAMPLE.
PRODUCTS CAN AESTETICHALLY VARY DEPENDING ON PRODUCTION LOTS.

 

Browse this category: POWER DIVIDERS