LDG - AT-600PRO-II - AUTOMATIC TUNER

Currently unavailable

Notify on availability
Old price 529.00 €
445.00
You save 16 %
Price incl. VAT, plus delivery
Available delivery methods: STANDARD delivery WITH INSURANCE, Pickup by customer in our physical shop, STANDARD DELIVERY IN ITALY, HEAVY (over 10 kg) OR BULKY GOODS - ONLY FOR DESTINATIONS IN ITALY!, HEAVY (over 10 kg) OR BULKY GOODS WITH INSURANCE - ONLY FOR DESTINATIONS IN ITALY!, EUROPE 1 - SMALL PARCEL (UP TO 10 KG) - NO INSURANCE, EUROPE 2 - LARGE / LONG OR OVER 10 KG PARCEL - NO INSURANCE, EUROPE 1 - SMALL PARCEL - (UP TO 10 KG) - WITH INSURANCE, EUROPE 2 - LARGE / LONG OR OVER 10 kg PARCEL - WITH INSURANCE, CORRIERE STANDARD ISOLE MINORI E VENEZIA LAGUNA, CORRIERE MERCE ASSICURATA ISOLE MINORI E VENEZIA LAGUNA (fino a 10 kg)

LDG - AT-600PRO-II - AUTOMATIC TUNER WITH 2 POSITIONS ANTENNA SWITCH - 1.8-54 MHz - 600 W p.e.p.

The LDG AT-600ProII is a general purpose automatic tuner intended for use with midsize amplifiers with up to 600 watts output on SSB or CW from 1.8 – 54 MHz.

Like most LDG tuners the AT-600ProII operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. To protect its circuitry it will not tune at power levels above 150 watts; bypass your amplifier (or place it in Standby) to complete a tuning cycle using only the exciter. The AT-600ProII also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.

The AT-600ProII has a large, easy to read bar-graph wattmeter that show forward and reverse power with two selectable ranges (60 and 600 watts), as well as an SWR meter. The AT-600ProII will interface with many popular transceivers so you can start a tuning cycle with the radio’s TUNE button. Dedicated control buttons on the tuner allow you to fine-tune capacitance and inductance on those rare occasions when the AT-600ProII can’t find a perfect match by itself.

The AT-600ProII features two output connectors so you can easily switch between two antennas. There are 2,000 memory locations for each antenna, allowing nearly instant returning on frequencies you’ve used before.

The AT-600ProII will tune from 1.8 to 54.0 MHz continuously, and will match Yagis, dipoles, inverted-Vs, slopers, or virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 – 150 ohms on 6 meters). Tuning time is usually under 10 seconds; memory tuning time is under 0.2 seconds. Longwires or antennas fed with ladder line require an external balun, not included.

TECHNICAL SPECIFICATIONS

  • 600 Watts SSB/CW, 200W Digital. 200 max on 6M
  • Easy to read LED bar graph display for RF power, SWR and status
  • 4,000 memories for instantaneous band changing
  • Two position antenna switch with memories for each position
  • Built in frequency counter for memory operation
  • Frequency coverage: 1.8 to 54.0 MHz.
  • Tunes 6 to 800 ohm loads (16 to 150 ohms on 6M)
  • For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna
  • Includes DC power cable. 5.5×2.5mm
  • Power requirements: 11 to 16 volts DC at 750 mA max during tuning.
  • Enclosure: 10.5″ D x 8.5″ W x 2.5″ H inches
  • Weight: 3 pounds

Accessories

Product Note Status Price
RBA-1:1 - LDG - BALUN 1:1 200W RBA-1:1 - LDG - BALUN 1:1 200W
39.00 € *

Product data sheet

RBA-4:1 - LDG - BALUN 4:1 200W RBA-4:1 - LDG - BALUN 4:1 200W
39.00 € *

Product data sheet

LDG - RU-1:1 - UNUN / R.F. CHOKE LDG - RU-1:1 - UNUN / R.F. CHOKE
39.00 € *

Product data sheet

RU-4:1 - LDG - UNUN 4:1 200W RU-4:1 - LDG - UNUN 4:1 200W
39.00 € *

Product data sheet

LDG - RU-9:1 - UNUN 9:1 200W LDG - RU-9:1 - UNUN 9:1 200W
39.00 € *

Product data sheet

Y-ACC - LDG - Control Cable for Yaesu radios Y-ACC - LDG - Control Cable for Yaesu radios
18.00 € *
IC-1+AC1 - LDG - Control CABLE m 3.20 ICOM IC-1+AC1 - LDG - Control CABLE m 3.20 ICOM
39.00 € *
IC-PAC - LDG - Control cable for ICOM IC-PAC - LDG - Control cable for ICOM
18.00 € *
PL-259 JUMPER CABLE - Lenght: 50 cm PL-259 JUMPER CABLE - Lenght: 50 cm
10.00 € *
PL-259 JUMPER CABLE - Lenght: 100 cm PL-259 JUMPER CABLE - Lenght: 100 cm
12.00 € *
PL-259 JUMPER CABLE - Lenght: 50 cm H155 PL-259 JUMPER CABLE - Lenght: 50 cm H155
14.00 € *
PL-259 JUMPER CABLE - Lenght: 100 cm H155 PL-259 JUMPER CABLE - Lenght: 100 cm H155
16.00 € *
PL-259 AMPHENOL JUMPER CABLE - L=50 cm H155 PL-259 AMPHENOL JUMPER CABLE - L=50 cm H155
25.00 € *
PL-259 AMPHENOL JUMPER CABLE - L=100 cm H155 PL-259 AMPHENOL JUMPER CABLE - L=100 cm H155
27.00 € *
*
Prices incl. VAT, plus delivery
Display accessory details

Customers who bought this product also bought

*
Prices incl. VAT, plus delivery

Browse this category: LDG